There is no doubt that challenges are a part of any DIY project. I have yet to take on a project that has not had some kind of issue. Big or small, there is always something. I do not say that to discourage, but rather to encourage. Because it is the mistakes that teach us more than anything in this journey we are on. So today, let’s delve into some tips for overcoming DIY challenges that will inevitably come. Because we can overcome, and we will be smarter and stronger as a result.
Regular readers will know that I’ve faced a lot of challenges with my second bathroom renovation. When I last left you, I had boarded the shower wall with plaster board, then a layer of JackoBoards installed with mortar. I assumed it would be short work to add the mechanical fixings (a screw and washer), then seam tape and tanking. But it was not to be. I have hit a huge roadblock! I am trying to stay positive but these DIY challenges which feel impossible.

Here is what has happened: For some reason, despite my newfound skill of drilling into metal studs, I struggled to get some of the fixings installed. I do not know why, but the drill just would not penetrate. In a few cases, I may have hit a screw in the plaster board, but not in every case. Even where I did manage to drill into the metal stud, in a few instances, the screw just did not seem to catch, spinning but not really grabbing the stud.
So I have a wall that is partially secure, with plenty of extra holes from where the drill went through the cement and plaster boards but would not go into the metal stud.

Where do I go from here?
Without the mechanical fixings on such a high wall with so much tile (500 tiles!), I am worried that the boards will not hold. I had a lengthy discussion with AI, who agreed. The mortar is not enough.
As far as I can see, I have two options:
- Re-do part of the wall, cutting away the portion that I cannot secure and adding timber studs that I can easily drill into.
- Use toggle bolts into the plaster wall to help reinforce the portions of the wall that are not secure.
The idea of re-doing the wall feels impossible. I did such a good job on the plaster board, and the JackoBoards are hung with a good layer of mortar. I finally figured out how to drill into metal studs, although it is still not a perfect answer, since I cannot seem to make it work in a few places.
Not to mention the time spent. I work a full-time job, we are in the midst of a never-ending heatwave in London, and I am using every spare moment to make progress, regardless of how hot it is. A week’s worth of exhausting work will be for nothing if I need to redo the wall. Not to mention the extra week of re-work still ahead of me.
I will admit, I am frustrated. Close to tears. At times like these, I have to remember that a big part of learning is overcoming DIY challenges. The fact is, this should have been a fairly simple job, boarding the shower wall. But I am meeting challenges at every turn. And, I am discouraged.
But I cannot quit. I have got to find a way through. What should I do? How do you respond to overcoming DIY challenges?
Ways to Overcome DIY Challenges
Step Away and Get Some Perspective
My first step has been to step away for a few days. I am desperate to make progress, but sometimes, time away from a project can provide clarity. Besides, the heat is completely defeating me. For those outside of London, we have had 34+ degrees Celsius (93+ degrees Fahrenheit) for the last few days, and it is the fourth or fifth time this summer. Like most people in this country, we do not have air conditioning, other than this little unit on wheels that only works if you sit right in front of it. I am absolutely melting, while still trying to work in the bathroom.
So time away from the project in this dreadful heat will give me clarity. And it is critical for overcoming DIY challenges. Of course, my brain remains in the bathroom, thinking about my options. (It is worthwhile noting that this is not my first time facing challenges. Check out my approach for dealing with failures, which are inevitable in this DIY journey we are on. I am taking my own advice here!)
Make a List of Options
Let’s look at my options in more depth, as I work to find a way through.
Option 1: Re-do a portion of the wall
Re-doing the wall feels impossible, but actually, it is not. There are some good reasons to re-do the wall, not least of which is adding timber studs for absolute security:
- I would only have to remove about a third of the wall, in a straight line. So I could cut the JackoBoard and plaster board, straight down the wall. I’d use the multi-tool instead of the jab saw and just get it down and out of the way quickly. I know what is behind the wall. It should be quick and easy. (Famous last words!)
- If I cut it cleanly enough, there is even the possibility of re-installing the cut portion onto new studs. That might be overly optimistic, but it is a possibility.
- I would be removing boards that have quite a few holes in them, which is good. I can fill the holes with silicone and tanking agent, but it would be better if they were less damaged and more secure.
- I could add some timber studs to bulk up the wall, including at the place where I need to attach the new wall that will cover the pipes. This would make the new wall more secure and help in the long run.
- I have plenty of supplies. I was already thinking about what to do with the extra JackoBoards, since I originally planned to have three boarded walls in the shower before I had to change my plan.
- I know I would feel better with an absolutely secure option.

Option 2: Use toggle anchors to secure the wall
This is the easier but less secure option. I am sure it will work and is most likely just fine, since most of the wall is very secure and I will be adding a stud wall against this portion of the wall, which would provide a bit more security.
I purchased a few toggle anchors to try it out, and got one installed. The head of the screw is rounded though, which will sit proud above the surface and not work for the tile to be applied over it. So, if I go this route, I will need to get a different type of screw for the toggle bolts. (That was all they had when I popped in to my local DIY yesterday.) It feels secure, but honestly, the wall feels secure without the toggle anchors too. That does not mean it is.
Experiment and Persevere
The final step in facing these challenges is to try things out. Keep going. Do not give up.
In my case, I’ve explored the two options and need to make a decision. Bottom line: I need to be able to trust my work, and I am leaning toward re-doing the wall, for the security it will give the bath and my own peace of mind. But, I will take a bit more time, and the chance to step away, before I make a decision.
What do you think? Should I re-do the wall or simply add the anchors and move on? Please share, your insights will be invaluable! And tell me, what is your approach to overcoming DIY challenges? How do you stay positive and moving forward?
Thank you, and happy DIY-ing!
Interested in similar posts? Check these related topics out:











Leave a Reply